Contract Address Details

// SPDX-License-Identifier: MIT

pragma solidity 0.6.12;
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        uint256 c = a + b;
        if (c < a) return (false, 0);
        return (true, c);
    }

    /**
     * @dev Returns the substraction of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b > a) return (false, 0);
        return (true, a - b);
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
        if (a == 0) return (true, 0);
        uint256 c = a * b;
        if (c / a != b) return (false, 0);
        return (true, c);
    }

    /**
     * @dev Returns the division of two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b == 0) return (false, 0);
        return (true, a / b);
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b == 0) return (false, 0);
        return (true, a % b);
    }

    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     *
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a, "SafeMath: addition overflow");
        return c;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b <= a, "SafeMath: subtraction overflow");
        return a - b;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     *
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        if (a == 0) return 0;
        uint256 c = a * b;
        require(c / a == b, "SafeMath: multiplication overflow");
        return c;
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b > 0, "SafeMath: division by zero");
        return a / b;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b > 0, "SafeMath: modulo by zero");
        return a % b;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {trySub}.
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b <= a, errorMessage);
        return a - b;
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryDiv}.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        return a / b;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting with custom message when dividing by zero.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryMod}.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        return a % b;
    }
}
interface IERC20 {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
}
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize, which returns 0 for contracts in
        // construction, since the code is only stored at the end of the
        // constructor execution.

        uint256 size;
        // solhint-disable-next-line no-inline-assembly
        assembly { size := extcodesize(account) }
        return size > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        // solhint-disable-next-line avoid-low-level-calls, avoid-call-value
        (bool success, ) = recipient.call{ value: amount }("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain`call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
      return functionCall(target, data, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.call{ value: value }(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data, string memory errorMessage) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.staticcall(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
        require(isContract(target), "Address: delegate call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    function _verifyCallResult(bool success, bytes memory returndata, string memory errorMessage) private pure returns(bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly

                // solhint-disable-next-line no-inline-assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}

library SafeERC20 {
    using SafeMath for uint256;
    using Address for address;

    function safeTransfer(IERC20 token, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
    }

    function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
    }

    /**
     * @dev Deprecated. This function has issues similar to the ones found in
     * {IERC20-approve}, and its usage is discouraged.
     *
     * Whenever possible, use {safeIncreaseAllowance} and
     * {safeDecreaseAllowance} instead.
     */
    function safeApprove(IERC20 token, address spender, uint256 value) internal {
        // safeApprove should only be called when setting an initial allowance,
        // or when resetting it to zero. To increase and decrease it, use
        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
        // solhint-disable-next-line max-line-length
        require((value == 0) || (token.allowance(address(this), spender) == 0),
            "SafeERC20: approve from non-zero to non-zero allowance"
        );
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
    }

    function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 newAllowance = token.allowance(address(this), spender).add(value);
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }

    function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 newAllowance = token.allowance(address(this), spender).sub(value, "SafeERC20: decreased allowance below zero");
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.

        bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
        if (returndata.length > 0) { // Return data is optional
            // solhint-disable-next-line max-line-length
            require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
        }
    }
}

contract ContractGuard {
    mapping(uint256 => mapping(address => bool)) private _status;

    function checkSameOriginReentranted() internal view returns (bool) {
        return _status[block.number][tx.origin];
    }

    function checkSameSenderReentranted() internal view returns (bool) {
        return _status[block.number][msg.sender];
    }

    modifier onlyOneBlock() {
        require(!checkSameOriginReentranted(), "ContractGuard: one block, one function");
        require(!checkSameSenderReentranted(), "ContractGuard: one block, one function");

        _;

        _status[block.number][tx.origin] = true;
        _status[block.number][msg.sender] = true;
    }
}

interface IBasisAsset {
    function mint(address recipient, uint256 amount) external returns (bool);

    function burn(uint256 amount) external;

    function burnFrom(address from, uint256 amount) external;

    function isOperator() external returns (bool);

    function operator() external view returns (address);

    function transferOperator(address newOperator_) external;
}
interface ITreasury {
    function epoch() external view returns (uint256);

    function nextEpochPoint() external view returns (uint256);

    function getNavaPrice() external view returns (uint256);

    function buyBonds(uint256 amount, uint256 targetPrice) external;

    function redeemBonds(uint256 amount, uint256 targetPrice) external;
}

contract ShareWrapper {
    using SafeMath for uint256;
    using SafeERC20 for IERC20;

    IERC20 public share;

    uint256 private _totalSupply;
    mapping(address => uint256) private _balances;

    function totalSupply() public view returns (uint256) {
        return _totalSupply;
    }

    function balanceOf(address account) public view returns (uint256) {
        return _balances[account];
    }

    function stake(uint256 amount) public virtual {
        _totalSupply = _totalSupply.add(amount);
        _balances[msg.sender] = _balances[msg.sender].add(amount);
        share.safeTransferFrom(msg.sender, address(this), amount);
    }

    function withdraw(uint256 amount) public virtual {
        uint256 masonShare = _balances[msg.sender];
        require(masonShare >= amount, "Masonry: withdraw request greater than staked amount");
        _totalSupply = _totalSupply.sub(amount);
        _balances[msg.sender] = masonShare.sub(amount);
        share.safeTransfer(msg.sender, amount);
    }
}

contract Masonry is ShareWrapper, ContractGuard {
    using SafeERC20 for IERC20;
    using Address for address;
    using SafeMath for uint256;

    /* ========== DATA STRUCTURES ========== */

    struct Masonseat {
        uint256 lastSnapshotIndex;
        uint256 rewardEarned;
        uint256 epochTimerStart;
    }

    struct MasonrySnapshot {
        uint256 time;
        uint256 rewardReceived;
        uint256 rewardPerShare;
    }

    /* ========== STATE VARIABLES ========== */

    // governance
    address public operator;

    // flags
    bool public initialized = false;

    IERC20 public nava;
    ITreasury public treasury;

    mapping(address => Masonseat) public masons;
    MasonrySnapshot[] public masonryHistory;

    uint256 public withdrawLockupEpochs;
    uint256 public rewardLockupEpochs;

    /* ========== EVENTS ========== */

    event Initialized(address indexed executor, uint256 at);
    event Staked(address indexed user, uint256 amount);
    event Withdrawn(address indexed user, uint256 amount);
    event RewardPaid(address indexed user, uint256 reward);
    event RewardAdded(address indexed user, uint256 reward);

    /* ========== Modifiers =============== */

    modifier onlyOperator() {
        require(operator == msg.sender, "Masonry: caller is not the operator");
        _;
    }

    modifier masonExists {
        require(balanceOf(msg.sender) > 0, "Masonry: The mason does not exist");
        _;
    }

    modifier updateReward(address mason) {
        if (mason != address(0)) {
            Masonseat memory seat = masons[mason];
            seat.rewardEarned = earned(mason);
            seat.lastSnapshotIndex = latestSnapshotIndex();
            masons[mason] = seat;
        }
        _;
    }

    modifier notInitialized {
        require(!initialized, "Masonry: already initialized");
        _;
    }

    /* ========== GOVERNANCE ========== */

    function initialize(
        IERC20 _nava,
        IERC20 _share,
        ITreasury _treasury
    ) public notInitialized {
        nava = _nava;
        share = _share;
        treasury = _treasury;

        MasonrySnapshot memory genesisSnapshot = MasonrySnapshot({time : block.number, rewardReceived : 0, rewardPerShare : 0});
        masonryHistory.push(genesisSnapshot);

        withdrawLockupEpochs = 6; // Lock for 6 epochs (36h) before release withdraw
        rewardLockupEpochs = 3; // Lock for 3 epochs (18h) before release claimReward

        initialized = true;
        operator = msg.sender;
        emit Initialized(msg.sender, block.number);
    }

    function setOperator(address _operator) external onlyOperator {
        operator = _operator;
    }

    function setLockUp(uint256 _withdrawLockupEpochs, uint256 _rewardLockupEpochs) external onlyOperator {
        require(_withdrawLockupEpochs >= _rewardLockupEpochs && _withdrawLockupEpochs <= 56, "_withdrawLockupEpochs: out of range"); // <= 2 week
        withdrawLockupEpochs = _withdrawLockupEpochs;
        rewardLockupEpochs = _rewardLockupEpochs;
    }

    /* ========== VIEW FUNCTIONS ========== */

    // =========== Snapshot getters

    function latestSnapshotIndex() public view returns (uint256) {
        return masonryHistory.length.sub(1);
    }

    function getLatestSnapshot() internal view returns (MasonrySnapshot memory) {
        return masonryHistory[latestSnapshotIndex()];
    }

    function getLastSnapshotIndexOf(address mason) public view returns (uint256) {
        return masons[mason].lastSnapshotIndex;
    }

    function getLastSnapshotOf(address mason) internal view returns (MasonrySnapshot memory) {
        return masonryHistory[getLastSnapshotIndexOf(mason)];
    }

    function canWithdraw(address mason) external view returns (bool) {
        return masons[mason].epochTimerStart.add(withdrawLockupEpochs) <= treasury.epoch();
    }

    function canClaimReward(address mason) external view returns (bool) {
        return masons[mason].epochTimerStart.add(rewardLockupEpochs) <= treasury.epoch();
    }

    function epoch() external view returns (uint256) {
        return treasury.epoch();
    }

    function nextEpochPoint() external view returns (uint256) {
        return treasury.nextEpochPoint();
    }

    function getNavaPrice() external view returns (uint256) {
        return treasury.getNavaPrice();
    }

    // =========== Mason getters

    function rewardPerShare() public view returns (uint256) {
        return getLatestSnapshot().rewardPerShare;
    }

    function earned(address mason) public view returns (uint256) {
        uint256 latestRPS = getLatestSnapshot().rewardPerShare;
        uint256 storedRPS = getLastSnapshotOf(mason).rewardPerShare;

        return balanceOf(mason).mul(latestRPS.sub(storedRPS)).div(1e18).add(masons[mason].rewardEarned);
    }

    /* ========== MUTATIVE FUNCTIONS ========== */

    function stake(uint256 amount) public override onlyOneBlock updateReward(msg.sender) {
        require(amount > 0, "Masonry: Cannot stake 0");
        super.stake(amount);
        masons[msg.sender].epochTimerStart = treasury.epoch(); // reset timer
        emit Staked(msg.sender, amount);
    }

    function withdraw(uint256 amount) public override onlyOneBlock masonExists updateReward(msg.sender) {
        require(amount > 0, "Masonry: Cannot withdraw 0");
        require(masons[msg.sender].epochTimerStart.add(withdrawLockupEpochs) <= treasury.epoch(), "Masonry: still in withdraw lockup");
        claimReward();
        super.withdraw(amount);
        emit Withdrawn(msg.sender, amount);
    }

    function exit() external {
        withdraw(balanceOf(msg.sender));
    }

    function claimReward() public updateReward(msg.sender) {
        uint256 reward = masons[msg.sender].rewardEarned;
        if (reward > 0) {
            require(masons[msg.sender].epochTimerStart.add(rewardLockupEpochs) <= treasury.epoch(), "Masonry: still in reward lockup");
            masons[msg.sender].epochTimerStart = treasury.epoch(); // reset timer
            masons[msg.sender].rewardEarned = 0;
            nava.safeTransfer(msg.sender, reward);
            emit RewardPaid(msg.sender, reward);
        }
    }

    function allocateSeigniorage(uint256 amount) external onlyOneBlock onlyOperator {
        require(amount > 0, "Masonry: Cannot allocate 0");
        require(totalSupply() > 0, "Masonry: Cannot allocate when totalSupply is 0");

        // Create & add new snapshot
        uint256 prevRPS = getLatestSnapshot().rewardPerShare;
        uint256 nextRPS = prevRPS.add(amount.mul(1e18).div(totalSupply()));

        MasonrySnapshot memory newSnapshot = MasonrySnapshot({
            time: block.number,
            rewardReceived: amount,
            rewardPerShare: nextRPS
        });
        masonryHistory.push(newSnapshot);

        nava.safeTransferFrom(msg.sender, address(this), amount);
        emit RewardAdded(msg.sender, amount);
    }

    function governanceRecoverUnsupported(IERC20 _token, uint256 _amount, address _to) external onlyOperator {
        // do not allow to drain core tokens
        require(address(_token) != address(nava), "nava");
        require(address(_token) != address(share), "share");
        _token.safeTransfer(_to, _amount);
    }
}